|
|
Current page: 40 | |
| MAINTENANCE |
Cleaning
When the unit becomes dirty
Clean it with a soft cloth.
When the unit is excessively dirty, use a soft cloth dampened in water.
(External surfaces only)
Clean the headphone plug and the RCA cord plug.
This will prevent noise.
Notes:
| SPECIFICATIONS |
| As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. |
General| Power source: | DC 3.6V (rechargeable lithium-ion battery x 1) DC 5V (AC adaptor) AC 120V, 60 Hz | |
| DC 3V: | Optionally available battery case, AD-M70BC (commercially available, �AA� size, alkaline battery x 2) | |
| DC 4.5V: | Optionally available car adaptor, AD-CA20X (for cars with a 12-24V DC negative ground electrical system) | |
| Power consumption: | 0.15 A (AC adaptor) 4 W | |
| Output power: | RMS; 20 mW (10 mW + 10 mW) (0.2% T.H.D.) | |
| Charging time: | Approx. 2.5 hours (When using the AC adaptor included with the unit) | |
Battery life:
| When using the recharge-able battery (fully charged) included with the unit | When using two, commercially available, high capacity, �AA� size, alkaline batteries (in the optionally available battery case) | When using two, commercially available, high capacity, �AA� size batteries with the recharge-able battery (fully charged) |
| Continuous recording: Approx. 3.5 hours |
Continuous recording: Approx. 4 hours |
Continuous recording: Approx. 7.5 hours |
| Continuous play: Approx. 5 hours |
Continuous play: Approx. 8 hours |
Continuous play: Approx. 13 hours |
|
|
Current page: 40 | |